Townhouse Buildings In California Get Quality Design & Engineering Plans/Permit Sets

Local, Fast, Affordable, One-stop-shop

Ability to take on a project anytime

Pre-construction management services at no additional cost

I hired Design Everest(DE) to do an engineering study with lateral analysis for an addition on a second story of a townhouse(so...complicated).
I got three quotes, two from solo engineers and another from DE. The prices was very similar (actually DE was the lowest,but barely so). The solo engineers both had very limited customer service skills, was slow to respond, and/or seemed offended by my requests to communicate the need to keep townhouse limitations in mind when drawing up the engineering. One even tried to upsell me on his hardware.
DE is a company that puts itself between you and the engineer - which is a good thing i found. They respond quickly all the time with good customer service. The engineer (who I never needed to speak with directly besides the site visit) got my townhouse concerns through them and was able to make an appropriate plan that wasn't too complicated without further word from me.
When the city asked for some further calculations, they responded with their timeline promptly and delivered an update.
Next time I have need of an engineer.I"ll go straight to DE. See more

- Gabe O. Sunnyvale, CA

Townhouses/Townhomes are attached having at least one common wall with another, and can be a great way to have multiple housing units on a rather restricted land area. These residential building types are particularly useful in urban infills where there could be limited land availability or the land may be at a premium cost. For these reasons Townhouses can yield a great return on investment for the developers.

The homeowners also benefit from Townhouses as its more affordable, and the maintenance of the exterior and the common area is done by the HOA.

At Design Everest, an experienced consultant will work closely with you to understand your needs and objectives. You will then be supported by a Project Manager who is responsible for delivering them and ensuring quality and deadlines.

OUR PRE-CONSTRUCTION SERVICES FOR TOWNHOMES

Architecture

We connect you with a trusted architect in your area who will develop the plans in the proper Architectural Permit Set. This is a prerequisite for starting engineering activities.
Structural & Civil Engineering

We possess vast experience in a range of residential structural and civil engineering services and the necessary permits. On completing this step, we even refer you to a contractor partner in your area for the next steps.
MEP System Design &
Energy Performance Compliance

Our MEP engineers provide the HVAC, Electrical and Plumbing system design plans for permits. These are essential to ensure safe & proper functioning of building utility functions like ventillation, temperature control, electricity and plumbing. We also provide Title 24 & CAL Green services required in the State of California for new and existing buildings to achieve and maintain energy efficiency.
Construction Administration

During construction, our ongoing administration service ensures that the construction goes as planned and adheres to the quality with which the project was engineered. We have a dedicated team, phone number and email to facilitate this process. Construction Administration is critical in preventing rework and delays.

Select Projects

Six-unit Townhouses, Sunnyvale, CA

Total six-unit townhouses with three floors and 4 units with 2,086 sq.ft. space and 2 units with 1,460 sq.ft of living space with both these type of units have 4 beds and 3 baths
We prepared the Structural Engineering plans for this project
Each unit also has almost ~500 sq.ft. garage on the ground floor

Multi-unit Residential, San Gabriel, CA

We prepared the Civil Engineering plans for the access ramp to the underground parking

Two-unit Condominium, Imperial Beach, CA

Two-unit condominium, one with 2,086 sq.ft. and other unit with 1,460 sq.ft of living space with both units having 3 beds and 3 baths
We prepared the Structural Engineering and Civil Engineering plans including Grading, Drainage, and Erosion Control Plan
Each units also have a two-car garage along with separated roof decks

Interior remodel, San Jose, CA

Architecture and Structural Engineering for a Kitchen and Bathroom remodel of a duplex condominium unit.

Shipley condominiums, San Francisco, CA

YEAR: 2019
Architect: Stanley Saitowitz
Estimated construction cost: $1M
A new ground-up residential building
Structural engineering for an entirely new four-story + basement concrete building housing 24 residential units
Area of 37,000 sq. ft.
Ongoing project

Exterior Remodel, San Francisco, CA

Exterior remodel of a 15 story building
Developer: Mosser

Seismic Retrofit & Remodel, San Francisco, CA

Delivered the architecture (via a partner), engineering, and Title 24 energy permit calculations

Soft-story Retrofit of an apartment building, Los Angeles, CA

Soft-story retrofit of a 67 unit, 3-Story multifamily apartment building
Addition of four Simpson Ordinary Moment Frame on the south side of the building
Moment Frame is added to the open space on the ground floor
Two isolated footings each connected with a tie beam were added for each Moment Frame

Soft-story retrofit of a 7 unit apartment building, Los Angeles, CA

Delivered the engineering for the seismic retrofit of a 7 unit, 2-Story multifamily apartment building
Addition of one Simpson Ordinary Moment Frame in the Southside of the building
Moment Frame is added to the open space on the ground floor
Two isolated footings each connected with a tie beam was added for each Moment Frame

Soft-story retrofit of a 35 unit apartment building, Los Angeles, CA

35 unit 2-Story multifamily apartment building
Delivered the engineering for the seismic retrofit
Addition of two Simpson Ordinary Moment Frame in the south side of the building
Moment Frame is added to the open space on the ground floor
Two isolated footings each connected with a tie beam was added for each Moment Frame

Soft-story retrofit of a 34 unit apartment building, Los Angeles, CA

34 unit 2-Story multifamily apartment building
Addition of two Simpson Ordinary Moment Frame in the south side of the building
Moment Frame is added to the open space on the ground floor
Two isolated footings each connected with a tie beam was added for each Moment Frame

Get Started with a Consultation

Why choose Design Everest?

Experience & Value Engineering

We are a true one-stop shop with experience in a wide range of specializations related to townhouses. Our experienced Architects and Engineers plan efficient structures using the concepts of value engineering to help clients can save on the overall cost of the project.
Responsiveness and quick turnaround

Unlike most firms, we leverage technology, and make every effort to get high-quality plans delivered in weeks -- not months. Hey, who said construction has to be painful?
Ability to take on a project
anytime

Our proprietary data system ‘The Design Hub’ allows us to efficiently forecast and optimize our resources. This means we can take on a project of any size at any time while maintaining quality and schedule.

How it works

Consultation

To start, a Design Everest associate schedules a consultation with you to fully understand your needs.
Quick Turnaround

Once we understand your needs, we deliver plans drawings for your project. We have a quick turnaround time with the option to track your project in real-time.
Easy Permit Process

We will provide a set of drawings that you may submit to the city to obtain the required permits. Our fixed fee includes addressing all City comments (if any) that are in our scope and on our plans until the permit is approved. Next, we can connect you with reputable contractors in your area, so you can get started with your project right away.